U-Reach CF duplicator can copy up to 3.9 GB/min. on all devices, simultaneously and without any speed degradation as number of targets increase.

• Systems and Files (Quick Copy Mode)

1. The duplicator automatically copies only the data area, rather than the empty spaces within the capacity, which reduces the duration of the copy process. 

2. This copy mode supports the file formats such as Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX). If the file system format to be copied is not among the supported formats above, then system will automatically switch to "whole media copy" mode.

• Whole Media

1. The duplicator copies from the initial sector to the end, bit-by-bit.

2. There are no format limitation in this mode.

• H3 Read Only Test
  Determines if the flash is readable. This test will not modify pre-existing data.
• H5 Write/Read Test
  Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. Once the test passes, then devices are formatted into FAT.
• H6 Quality Test
  Resembling the H5 test, it overwrites machine generated-values only to the empty sectors without disturbing pre-existing data, partitions, and formats.
• Capacity Check
  Verifies initial sector and the final sector the connected flash device within 2 seconds.
• Read/Write Speed Check
  This function performs a read/write benchmark of the connected devices within 8 seconds.

With a specially redesigned and improved structure, users can easily change the sockets in 3 simple steps, which takes roughly 1 minute.

• Modular Sockets

Interfaced sockets are subjected to wear-and-tear caused by frequent connections and disconnects. Modular sockets enable quick replacements while reducing downtime, effectively making this solution a long-term and cost-effective ownership.

• Ergonomic & Compact Proportions

The refined ergonomic proportion reduces the flash duplicator by 50% to 70% compared to traditional chassis design.