U-Reach PHS-SAS Series PCIe SSD duplicator is capable of copying at 24GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

When each round of duplication is completed, the next round can start immediately without having to wait or restart the machine

U-Reach PCIe SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.

Illustration of Copy Modes 

The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive's controller chip.

U-Reach PHS-SAS Series PCIe SSD Duplicatpr can automatically detects NVMe/SAS signal facilitating cross interface/cross-protocol duplication.

Note:
When doing cross-protocol duplication, it is recommended to use a data disk. If you are copying OS system, it is recommended to use the same protocol device to ensure the device can boot into the operating system properly.

PHS-SAS Series M.2 PCIe SSD duplicator enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.

• Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
• Whole media copy mode supports all system and proprietary formats.
• Supports various brands.
• Designed to support 18TB+ capacities. 
• Supports MBR and GPT partitioning.

In addition to the bit-to-bit comparison function, PHS-SAS uses the CRC international calculation standard to confirm the correctness of the data, and whether the source data is correct. User only needs to confirm the CRC value at the end of the copy, and can also confirm whether the copied data is correct.