Vector-AG Technology Limited
- Unit 2012, 20/F, Global Gateway Tower, 63 Wing Hong Street, Lai Chi Kok, Kowloon, Hong Kong.
When reusing DLT tapes, it is important that all data and formatting is removed completely. The V91 DLT/LTO tape degausser has a powerful degaussing magnet that removes all patterns, thus eliminating all data and formatting, leaving them completely clear and ready to reuse. Degaussing DLT, LTO and other magnetic media will ensure that subsequent recordings will be at their very best. Degaussing can extend the life of magnetic media such as DLT, which in turn delivers cost savings.
LTO degaussers such as the V91 DLT/LTO alter the magnetic charge on LTO tape cartridges. This process will erase the data stored on the tape and also erases the cartridge’s servo tracks, making the cartridge completely unreadable. Note: Some backup tapes may not be reusable after degaussing due to the servo track being erased.
Media Handing: DLT and LTO Back-up tapes
Erase Time: 12 seconds typ.
Magnetic Force: 5,100 Gauss
Throughput: 80 DLT/LTO tapes per hour
For Erasing Cassettes and Cartridges the operator turns the security key on the front of the V91 DLT/LTO to the “On” position. Pressing the red “Power” button turns on the magnetic field. The operator then takes the media and passes it across the middle of the top surface on the V91 DLT/LTO from one side to the other in one slow and smooth motion. Turn the media through 90° and repeat the motion. Flip over the media and subject it to a third pass, turn 90° and do a fourth and final pass.
The media is now erased and ready for reuse if required.
The V91 DLT/LTO degausser comes with a generous 36 month back to base, all parts and labor included warranty. Extended warranties also available. We are so confident in our product build quality that whether you opt for an extended warranty or not, our factory-based technical support team are available for free phone and email support. This support extends for the entire lifetime of ownership.
The V91DLT/LTO is designed to help you comply with the following Government Mandates that require destruction of sensitive information stored on Backup Tapes before their reuse or/and disposal.
With safety in mind and to meet the latest ICNIRP Magnetic Exposure Guidelines, the V91 DLT/LTO field is concentrated near the top operational surface where the media is degaussed.
Degauss Method: Flatbed manual degausser
Media Handling: DLT Tapes: Super DLT I, II & III, DLT IV, S-DLT, LTO1, LTO2, LTO3, LTO4; LTO5, LTO6, LTO7 & LTO8 9840; 9940, 3590E (Redwood)
Other media erased:
½” Computer Tape; Diskettes – single/boxed; DC 600, 2000; TK50, 70, 85, 3480/3490E; 4mm; 8mm; Exabyte; Travan; DLT; DAT; ZIP Disk; Ultrium, HDCam, 1” Tape on Reels up to 14” diameter
Magnetic Force: 5,100 gauss
Throughput: 80 DLT/LTO tapes per hour typical
Duty Cycle: Non-Continuous
Power Supply: 110-115 VAC, 60Hz; 220-240 VAC, 50Hz
(Specify voltage and frequency when ordering)
Current Rating: 50Hz 7 Amps, 60Hz 12 Amps Typical
Controls: On/Off Power switch, Security key
Dimensions (WxHxD): 16.5" x 6" x 19" (42cm x 15cm x 48cm)
Unit Weight: 53lbs (24kg)
Packed Dimensions (WxHxD): 20.8" x 25.5" x 10.6" (53cm x 65cm x 27cm)
Packed Weight: 75lbs (34kg)
Temperature: 41°F - 104°F (5°C - 40°C)
Humidity: 10%H – 40%H Without Condensation
Warranty: 36 months back to base, all parts and labor included. Extended warranties also available.
Certifications: CE
Specifications are subject to change without notice
Note: After degaussing, hard drives should not be reused as they are stressed in the erasure process. Some backup tapes may not be reusable after degaussing due to the servo track being erased.